A Wirtgen concrete paving train impresses with high productivity in Texas

A WPS 62i Placer Spreader leads the first
‘Full-line Paving Train’ for continuously reinforced concrete pavement

Continuously reinforced concrete pavement is particularly attractive due to its low maintenance costs. It is cost-effective, extremely durable and requires very little maintenance. In Conroe, Texas, around 50 kilometres from Houston, Larry Young Paving Inc. is constructing a link road using this method and is taking advantage of the particular benefits of the new Wirtgen WPS 62i Placer/Spreader. In perfect weather and springtime temperatures around 26°C, the belt conveyor of the placer/spreader is usually loaded from two mixer trucks. It always takes less than two minutes to complete the loading process. As a result of this, the paving train can achieve an area performance of around 480 m²/h, corresponding to an advance rate of approximately 1 m/min.

Project:
  • Construction of a new service road for an industrial estate
  • Overall length of the construction project: 2.4 miles (3.8 km)
  • Road bed width: 52 ft (15.8 m)
  • Paving width: 26 ft (7.9 m) *
  • Paving thickness: 8 in (20 cm)
Project details:
  • Continuously reinforced concrete pavement
  • 0.7% reinforcement by cross-sectional area, ¾ in (19 mm) steel rebar – in all, over 500 tons of reinforcing steel
  • Placement of concrete with a placer/spreader
  • Overall road bed area: 72,000 yd² (60,500 m²)
  • Project duration approx. 4 weeks
Machines used:
  • WPS 62i
    Working width: 24 ft (7.3 m) - Working height: 10 in (25 cm)
  • SP 62i
    Paving width: 26 ft (7.9 m) - Paving thickness: 8 in (20 cm)
    *Modification carried out by the customer – standard paving width SP 62i - max. 24 ft (7.50 m)
  • TCM 1800
    Longitudinal texturing
    Application of emulsion as protection against weathering
Show more Show less
Construction company:
  • Larry Young Paving Inc., Bryan, Texas, USA
Show more Show less

The belt conveyor of the WPS 62i can also be loaded from two mixer trucks without any difficulty.

High-speed concrete paving – the WPS 62i increases productivity by 40%

As transport vehicles cannot unload concrete directly in front of the paving train when constructing roads with continuously reinforced concrete pavement, it is often placed and spread from the side by a wheel loader or excavator. The paving speed of a Slipform Paver essentially depends on how quickly and evenly the concrete can be placed and spread. Thanks to the use of the WPS 62i, the paving crew from Larry Young Paving Inc. was able to significantly increase the placing and spreading speed. This in turn enabled an increase in the working speed of the SP 62i Slipform Paver. In comparison with previous paving projects, the paving crew was able to increase overall productivity by around 40%. Instead of a mixer trucks, dump trucks can also be used for delivering concrete to the paving train. This enables optimal exploitation of the performance potential of the WPS and maximises productivity. Although a higher paving speed due to the use of the placer/spreader had been factored into calculations during the planning phase, no one had reckoned with such a significant improvement. As a result of this, the construction project was completed in around four weeks –one week less than originally planned.

Concrete paving in Conroe, Texas
Three machines, one mission – cost-effective construction of high-quality concrete paving

The use of three optimally coordinated machines brings a number of benefits. In addition to those directly reflected by the paving results, the easier handling is an enormous advantage. Due to the standardised, fleet-wide operating concept, the controls of the machines are almost identical. Training time is reduced to a minimum and machine operators are able to concentrate on what really counts: the paving results.

Wirtgen full-line paving train – consisting of a WPS 62i, a SP 62i and a TCM 1800.

Intuitive operation and concrete paving with absolute precision

The paving crew is already used to the operating concept of the Wirtgen SP 62i and feels at home on the machine. The machine has been in use on a number of other paving projects and, in the meantime, has clocked up quite a few operating hours. For instance, around a year ago in the Southern Pointe Community:

Read the press release about the compact SP 62i Slipform Paver

The professionals from Larry Young Paving Inc. were positively impressed after their first encounter with the new placer/spreader. ‘We were already familiar with the basic operating and control concept of the WPS from the Paver’, says Ronnie Carter, Assistant Project Manager at Larry Young Paving Inc. The short training period on the machine saves time and money, and paving can begin almost right away. The paving crew was also impressed by the remote control for height adjustment of the WPS strike-off wall. This enables the operator to conveniently adjust the height of the placed concrete, for example from onboard the Paver. This function was, however, not introduced solely for the sake of convenience, it also contributes to perfect paving results. At the same time, it enables the operator to easily monitor and assess the filling level in the compaction compartment and the quantity of concrete placed and spread from onboard the Paver.

One of our colleagues has never been on a machine this size before. The biggest thing he ever drove was a skid steer. He went up there and in one day, he was able to work with it and to move it without any issues.

Ronnie Carter, Assistant Project Manager, Larry Young Paving Inc.

Concrete paving workflow with a placer/spreader

With the Placer Spreader the whole work is a lot easier. This machine increased our productivity by about 40%. I love the remote control, it's amazing.

Daniel Pineda, Foreman, Larry Young Paving Inc.

The WPS features a folding feeder conveyor to make the positioning of transport vehicles as easy as possible. Deployment of the folding feeder unit takes less than six seconds, and therefore reliably avoids unproductive downtimes during paving.

It's easy to learn the operation of the new machine. It has the same mechanisms as the paver.

Jose Vanquez, Operator, Larry Young Paving Inc.

Unrivalled support around the globe from the Wirtgen Group service team

Four Wirtgen technicians provided applications support throughout the construction project and ensured that on-site operations ran smoothly.

Technical support
  • Workshop service
  • On-site service
Spare parts
  • Genuine spare parts
  • ‘Parts and More’ catalogue
Expertise
  • Training
  • Application consulting
  • WIDOS information system
Service agreements
  • SmartService
  • WITOS® FleetView telematics solution
TCM 180

Texture curing machine

Exhaust emissions category
EU Stage 3a/US EPA Tier 3
Working width 18,000 mm
Working height 500 mm
WPS 62

Placer/Spreaders

Exhaust emissions category
EU Stage 3a/US EPA Tier 3
Paving width
4,000 - 7,500 mm
Layer thickness
0 - 500 mm