SPECTIVE CONNECT is the logical extension of the SPECTIVE operating concept. All important information is transmitted to the operator's smartphone. Irrespective of whether the operator is in an excavator or wheel loader or somewhere else nearby, they always have all relevant information on the status of the machine at their disposal.* Apart from relevant data such as fuel consumption, current production output, diesel and urea filling levels, fault messages are also displayed. Work does not need to be interrupted to view the status. The option for preparing clearly arranged reports creates additional transparency for the operating company.
Yes SPECTIVE Connect builds up its own WLAN. The WLAN is secure and can only be accessed with the corresponding password.
The distance from which SPECTIVE CONNECT can receive data from the plant depends heavily on ambient conditions.
A free view without obstacles results in a longer range. The aim of SPECTIVE CONNECT is to transfer the operating concept with all relevant information on the plant to the operator in the excavator and not to transmit data over a range as far as possible.
As a guideline, however, in an area of 50-80 m around the crushing plant a good reception can be expected; even further depending on the situation.
Specialized knowledge: If the operator leaves the reception area with SPECTIVE CONNECT and then returns, he connects again automatically with the plant.
An overview showing all machines for which SPECTIVE CONNECT is available can be found at the bottom of the page under "Downloads"
SPECTIVE CONNECT can be retrofitted on all plants for which it is also available in series production. As is the case usually with retrofittable options, assembly instructions will also be delivered.
An overview showing all machines for which SPECTIVE CONNECT is available can be found at the bottom of the page under "Downloads"
Yes it will be possible to connect with a plant train.
Yes, that is possible. If too many devices are connected, however, malfunctions are possible as with every WLAN. Normally a maximum of 3 persons are in the vicinity of a plant. They can connect to the plant at the same time without any problems.
Yes, SPECTIVE CONNECT also has offline functions free of charge. They can also be used without hardware.
Simply download the App from the App Store or Google Play and try it out.
On the contrary: Thanks to SPECTIVE CONNECT, the operator does not need to climb out of the excavator or wheel loader as much as before to obtain information from the plant. As a result, the work process is interrupted less frequently and the plant performance and efficiency are increased.
The operator enters the danger area around the plant less than usual and is not exposed as much to environmental influences such as noise, dust, heat, cold and dampness. This increases comfort and work safety.
Plant performance, consumption and plant utilisation are made available in a transparent report. Apart from the basic documentation, this also provides an option for analysing the production process.
Furthermore, SPECTIVE CONNECT supports troubleshooting in a targeted manner and contributes to the reduction in downtimes if a fault should happen to occur on a machine.
As the WLAN of the plant has no connection to the Internet, a prompt usually appears on the smartphone asking whether mobile data is to be used in addition to the WLAN. This allows the operator to use the Internet and SPECTIVE CONNECT simultaneously.
SPECTIVE CONNECT has no effect at all on your data volume because the App still receives all data via the WLAN of the plant.
Important: The function was deactivated often in the past when users, e.g. save data in the local WLAN and want to avoid surfing accidentally in the Internet via the mobile data connection.
All belt scales and their individual results are listed.
The App can be used to create recipes, but even without the App the Smart Job Configurator provides rapid entry for convenient setting of the machine.
No, they still have to be entered manually.
No, the original settings are retained until they are changed manually.
The recipes can be exported from the App as a PDF and saved.
* It is possible that the App or individual features of it are not yet available in every country.
Apple and the Apple logo are trademarks of Apple Inc. and are registered in the USA and other countries. App Store is a service mark of Apple Inc. registered in the USA and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.