Laser receiver

Laser receiver

In contrast to acoustic sensors, optical sensor systems use laser beams instead of sound. The great advantage of optical sensors is that measurements cannot be falsified by external influences such as wind or fluctuations in air density. Another advantage is the extensive range of the laser beams, permitting distances up to 200m between transmitter and receiver.

When using a laser receiver for grade and slope control, grade is determined via the reception of laser beams. A rotating beam emitted by the rotary laser generates an accurate plane which is detected by the receiver as an artificial reference, the benefit being that the laser plane is independent of base conditions.

If the receiver moves above or below the laser plane, the deviation in grade is detected and passed on to the VÖGELE System for Automated Grade and Slope Control. Niveltronic Plus then moves the hydraulic rams for the screed tow points up or down to bring the screed back to its correct position.

Its generous measuring range of ± 11 cm means that the laser receiver can be used even on bases with significant undulations. No adjustment in height is required for either the rotary laser or the receiver.

Highlights
  • The VÖGELE laser receiver is particularly suitable for surfacing large areas with a consistently level surface, such as sports stadia, car parks, storage yards etc.
  • The VÖGELE laser receiver can be used with standard rotary lasers from different manufacturers featuring wavelengths between 670 and 1,000 nm.
  • Positioning the laser receiver at a height of up to 4.5 m guarantees uninterrupted measurement, even with job site vehicles passing.
  • The laser receiver can be combined with any VÖGELE sensor to control the other side of the screed, thus opening up a variety of different applications. Of course, it is also possible to use two laser receivers.