SF 1000 C

A Treasure to Behold

Everyone who sees the perfect paintwork and wonderful condition of this bright blue treasure when she rolls out of the company‘s garage is absolutely amazed. In comparison with today’s ergonomically designed milling machines, this massive lump of steel has something of the rugged, almost unfinished, looks of a little, old-fashioned diesel locomotive. There’s no cabin roof, and no trace at all of assistance systems, cameras, or high-tech equipment. Helmut Borkowski, an independent contractor since 1990, and the proud owner of this little gem, has gotten used to such reactions. “We once took the old girl to the Wirtgen plant, and everyone was called out of the workshops to see her. When we take her out on a job, people sometimes make fun of us when they see our SF 1000 C being rolled off her trailer. But she still does exactly what she was made for, and works just as well as she did 30 years ago”

Borkowski’s First New Machine – Optimized for Performance Right from the Start

For Borkowski, the SF 1000 C was the first machine the only recently founded company bought new. “She was our main machine, and we worked her day and night,” recalls Helmut Borkowski. Since then, the machine has clocked up over 7,000 operating hours, and her absolute milling record was 3,200 m² in a single day – pretty impressive performance in the early 1990s. Today, the machine is primarily deployed on relatively small sites of around 300 to 400 square meters. Although her milling depth performance is no longer what it was (8 cm instead of 10), customers appreciate her maneuverability and speed and order her specifically for their projects. “Customers often say: bring out the old machine – you can take the conveyor off it and you can mill at a 90° angle to the direction of travel – you can’t do that with one of those big machines.” In this respect, the SF 1000 C actually has a competitive edge over a modern W 50.

The Milling Machine Whisperers

Not only Helmut Borkowski, but also his colleagues Marco Mosebach and Udo Lehwald have worked with and on the machine and look after her like the apple of their eyes. “She’s a real classic – if she was a car, she’d have to join a vintage car club,” says Marco Mosebach. “The first thing you notice is the thin rim of her steering wheel. Although her responses are a little slow, there’s nothing electronic about her, so there’s a lot less that can go wrong. All she needs is an experienced operator with the right touch. You can actually feel what she needs.” So it’s no wonder that the company’s three “old hands” are the only ones allowed at her controls. “The old machine-operator adage still holds true,” says Marco with a grin. “Look at me and look at the milling drum, then you know who you’re dealing with.”

Shared Experiences Create Special Bonds

When man and machine work as a team for so many years, they are bound to experience a few bizarre situations. Udo Lehwald, who celebrated 30 years at the firm along with the machine early this year, recalls an emergency call-out to a snowbound freeway in the middle of the night. The fuel tank of a diesel truck had burst, and gallons of fuel ran out and soaked into the road surface. “I wouldn’t have been able to make it there alone, so a quickly organized convoy of a snow plow, a road sweeper, and a gritting truck cleared the way for me and the SF 1000 C from here to the scene of the incident.” It all went well, and the machine showed her particular talents again.

Best Spare Parts Service – Always Available and Always Solutions-Oriented

As qualified car mechanics and machine fitters, Marco and Udo know all the little ailments of their classic machine, and exactly what to do when they appear. It helps enormously that Wirtgen genuine spare parts are still available. And, in the rare case that they aren’t, as happened recently when the pump broke down, the Wirtgen service team checks the maintenance part, overhauls it, and sends it back in no time at all.

Udo grins as he recalls an incident where a hydraulic hose ruptured during milling at night and left the SF 1000 C stranded across two tram tracks. Fortunately, he had a replacement hose in the toolbox, remained calm and collected in the hectic race to clear the tracks, and had the machine out of the way and working again in around 45 minutes. These days, if a machine breaks down on the project site, Wirtgen Spare Parts Service is on the spot almost right away.

Borkowski GmbH and Windhagen – Mutual Respect and Appreciation

The relationship with the people in Windhagen is particularly close – everyone has known each other for decades, and there’s a great camaraderie. “Our deeply-rooted commitment to our customers also applies to our suppliers,” explains Helmut Borkowski. “This is why we arrange to meet them once a year to discuss the current situation, work out what could be better, and how we can solve any problems there might be on either side of the fence.” Wirtgen also likes to use Borkowski’s milling machine fleet for on-site testing of the latest machines in real-world scenarios – a win-win situation for both the manufacturer and the customer. The SF 1000 C is a little too long in the tooth to be able to play a part in this – but she is still of particular interest to Wirtgen from the perspective of sustainability.

No Reason to Look Back – Today’s Technology from Wirtgen Impresses across the Board

Nostalgia is all well and good, but the Borkowski team certainly appreciates the benefits of the latest generations of Wirtgen milling machines. “The most important thing,” says Helmut Borkowski, “is that the operator’s job is made easier with every new generation. The numerous different assistance systems make it easier and easier to deliver good results. The operator’s workplace is bigger and more clearly structured, the rear crawler unit is steerable, and the hourly performance is higher.” “Nevertheless,” says Marco, “I love to run a machine with old-fashioned, purely mechanical technology for a change – even though it’s nowhere near as easy.”

Borkowski’s “Blue Fleet” – Ready to Take on Any Challenge

Borkowski has grown along with the Wirtgen Group portfolio – also because of increasing demands and tighter completion deadlines. The customer has a fleet of ten Wirtgen small milling machines, seven Wirtgen compact milling machines, four Wirtgen large milling machines, and a Vögele mobile feeder that are all in service and ready to go at any time. These days, the once common modifications are a thing of the past and more or less limited to changing the milling drums – and even that is now much easier, thanks to the quick-change system.

Today, the “Blue Fleet” – incidentally a color deliberately chosen to make Borkowski stand out from other contractors on the market – is a common sight on construction sites in North Rhine-Westphalia. Whether for pavement removal, profiling, surface rehabilitation, or cutting joints – the spectrum of applications is enormous. And, if you keep your eyes open, you might catch a glimpse of a classic milestone from the history of cold milling – a bright blue Wirtgen SF 1000 C.