Concrete Paving with the SP 62i at Keflavik Air Base

At the Naval Air Station Keflavik, the military air base on the international airport at the port of Keflavik, about 50 km from Iceland’s capital, Reykjavik, contractor HIB Iceland Ehf constructed operational facilities covering an area of around 75,000 m² by concrete paving. As the overall project was commissioned by the U.S. government, all measurements used during the paving project were in imperial units. The contractor had to overcome a number of challenges to assure the success of the project for the extension of the parking aprons and an upgrade of the hazardous cargo pad at Keflavik Air Base.

Highest Quality, Despite the Challenging Deadline

Due to the climatic conditions on the Reykjanesskagi peninsula in the south west of Iceland, the time window for the project was set for the beginning of July to the end of September of the year. To pack the work into this timeframe, the decision was made to do without prior placement of fixed formwork for the individual strips.

Despite the tight deadline, the paving team was able to deliver highest quality results, not least due to state-of-the-art machine technology like the high-precision steering and leveling system and the automatic super smoother.

The SP 62i Produces Precise Edges to Ensure Perfect Surfaces and Optimal Drainage

Operational areas on airfields and airports generally have only a very slight cross-slope. In the case of the project in Keflavik, the maximum permissible cross-slope specified for the paved areas was only 1%. Surface water drains off across the full width of the parking apron, in this case, 235 m. The area was paved in 31 separate strips connected to one another by tie bars inserted along the sides to ensure the correct height of the individual sections. The outer edges of the strips posed a particular challenge for paving with the slipform method. They had to be precisely perpendicular from end to end and faultlessly paved with absolutely no fall. Only this can guarantee that rainwater is properly drained away during future operations, and that no water collects in the expansion joints.

Wirtgen Application Engineers Contribute to the Success of the Project through Assistance with the Formulation of the Concrete Mix

Essentially, concrete is always a mixture of cement, water and variously sized aggregates. However, in order to fulfill the future load-bearing and wear-resistance properties of the construction in question, a number of other additives and a more precise consideration of the above-mentioned main ingredients is needed. The required properties in the case of the extension work at Keflavik Air Base included, for example, a concrete with the compressive strength class C35/45. In order to achieve the desired compressive strength of 45 N/mm² (cubic concrete specimen), the ideal formula for the concrete mix was determined with the assistance of Wirtgen application engineers and optimized for paving with the slipform paver. In situ paving of the first pilot strips was able to begin immediately without trial areas. From the outset, these showed outstanding quality in all specified quality parameters such as density, compressive strength, profile-compliant placement and surface roughness, i.e. grip characteristics.

Maximum Evenness Over an Area of 75,000 m²

When it come to the operational areas of airfields and airports, demands for surface evenness are generally very high. At Keflavik Air Base, the specified maximum permissible unevenness was 4 mm over a distance of 4 m (length of the Planograph). In reality, the evenness measured according to TP Eben 2007* showed that deviations were significantly lower than the target value and that the evenness achieved was far better than the specified maximum permissible unevenness. *Technical testing regulations for evenness measurements on road surfaces in longitudinal and transverse directions. A clear sign of the quality that can be achieved only with a perfectly coordinated team and the right equipment.