Surface Miners and Cross Application Miners

image

Extraction of primary resources and execution of large-scale infrastructure projects without drilling and blasting

Ruggedly-built Surface Miners are used for the extraction of a wide range of primary resources by cutting in open cast mines. Thanks to selective extraction, they achieve high degrees of material quality and enable optimal exploitation of mineral deposits. Cross Application Miners are purpose-built for frequently changing applications, particularly in the course of larger infrastructure projects. These machines therefore differ to some extent in terms of features, equipment, and size and are therefore also easier to transport.

Surface Miners

Constructed especially for the tough operating conditions encountered in open cast mining, Surface Miners extract primary resources such as coal, gypsum, rock salt, phosphate, bauxite, or limestone with unconfined compressive strengths of up to 80 MPa with high purity and maximized exploitation of deposits. Centrally-located underneath the machine, the cutting drum can be customized to meet each customer’s specific needs. The extracted material can be deposited behind the machine in windrows, sidecast with the machine’s integrated discharge conveyor, or loaded directly onto trucks for transportation off site. Surface mining can be carried on a small scale in quarries with restricted space or in continuous operation (24/7) on large-scale open cast mining sites.

220 SMi Surface miners
220 SMi

Surface miners

Cutting width max.
7 ft 3 in
Cutting depth
11.8 in
Power 708 kW
Operating weight, CE
119,070 lbs
220 SMi 3.8 Surface miners
220 SMi 3.8

Surface miners

Cutting width max.
7 ft 3 in
Cutting depth
11.8 in
Power 708 kW / 950 hp
Operating weight, CE
130,095 lbs
280 SMi Surface miners
280 SMi

Surface miners

Cutting width max.
9 ft
Cutting depth
26 in
Power 783 kW / 1,050 hp
Operating weight, CE
256.949 lbs
4200 SMi Surface miners
4200 SMi

Surface miners

Cutting width max.
13 ft 9 in
Cutting depth
32 in
Power 1,194 kW / 1,600 hp
Operating weight, CE
450,397 lbs

Cross Application Miners

Cross Application Miners are characterized by their suitability for a wide range of applications. For example, they are used on demanding infrastructure projects, for cutting road and rail routes, lowering tunnel floors, and in the construction of harbors or water retention basins. Cutting drums are available for the mining of hard or soft rock. In most cases, the extracted material is loaded into road-legal construction site trucks with the machine’s integrated discharge conveyor. Due to frequently changing assignments, Cross Application Miners are easier to move from site to site than Surface Miners. Furthermore, the machines are designed and constructed to withstand only the typical stresses encountered on infrastructure construction sites, and are therefore not suitable for continuous mining operations.

260 SXi Surface miners
260 SXi

Surface miners

Cutting width max.
9 ft
Cutting depth
26 in
Operating weight, CE
226.856 lbs

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.