Cold recycler  W 240 CR

W 240 CR Cold recycler

wi-abgasstufe
EU not rated/US EPA Tier 2

breite
2,350 mm

hoehe
350

mm

High-quality in-place cold recycling

  • Machines from the CR series are used as part of a paving train for cost-effective, in-place cold recycling of road pavements in a single pass by adding cement, water and/or bitumen emulsion, or foamed bitumen at a mixing performance of up to 800 t/h
  • The high-performance W 240 CR with rear loading and working width of 2,350 mm is ideally suitable for renovation of road pavements in confined construction site conditions and can also be easily transported as a unit
  • Lateral pre-milling also enables the cold recyclers to flexibly rehabilitate road surfaces with widths greater than the machine’s working width in a single pass.
  • If required, cold recyclers can also be used as high-performance milling machines or for the granulation of pavement structures.
Highlights
Simple operating concept
Perfection in visibility, comfort and ergonomic design
Tremendous performance
High-precision, reliable injection systems
Effective cutting and mixing technology
W 240 CR / W 240 CRi with paving screed
W 240 CR / W 240 CRi / W 380 CR / W 380 CRi with rear-loading feature
1 / 2

Cold recycling with CR model series

The robust milling and mixing rotor granulates the damaged asphalt pavement. The granulated material is mixed with injected binders and water in the mixing chamber, thus creating a new homogeneous mix in an in-situ process.

If the CR is equipped with a built-in paving screed, the mix is conveyed towards the centre as a result of the helical design of the milling and mixing rotor and subsequently transported to the paving unit via the primary conveyor. The spreading auger distributes the material evenly ahead of the variable paving screed which then paves it true to grade and slope.

When cold recycling with integrated rear loading, the recycled mix is subsequently transported to the material hopper of the asphalt paver via the conveyor system comprising primary and discharge conveyor. The asphalt paver then paves the material true to grade and slope.

Learn more

Mixing procedures

Cold recycling can be achieved either in-plant by hauling material recovered from an existing road to a central depot where it is fed through a mixing unit, or in-place using a recycling machine.

When mixing in-place / in-situ, a cold recycler granulates the existing pavement while mixing in binders and water homogeneously at the same time.

When mixing in-plant, reclaimed asphalt pavement and crushed stone are transported to a mixing plant located in the vicinity of the construction site.

Learn more

WIRTGEN cutting technology

Results of high quality are the main goal of every construction project. This applies to road rehabilitation using cold milling machines and cold recyclers as well as to soil stabilization and the extraction of useful minerals using surface miners. Optimum interaction between the milling drum, toolholder and pick is essential for precise, efficient paving removal.

WIRTGEN is a market leader in cutting technology and offers customers perfectly matched, high-performance cutting systems. WIRTGEN is also constantly developing its cutting technology components further. Such further developments are largely based on practical experience and feedback from our customers.

Learn more

WIRTGEN levelling technology

WIRTGEN levelling technology controls height, depth and slope to achieve results of maximum precision. In the process, the system continuously reconciles the actual values with a preselected target value, correcting any deviations by means of proportional control. State-of-the-art machine engineering ensures levelling results of consistently high quality while at the same time relieving the machine operator of a significant part of his workload.

WIRTGEN offers customers reliable hardware and software developed in-house. Different systems are used depending on the construction project to be completed and local conditions on site.

Learn more

Control technology

WIRTGEN machines are fitted with a machine control system of the highest quality, in which the large proportion of software developed in-house plays the decisive role. WIRTGEN puts a special focus on continuous improvement, which has the added effect of significantly increasing the operational reliability of the machines. In addition, many years of experience in software and hardware development allow for higher and more flexible machine functionality in terms of applications and meeting specific customer requirements.

Learn more

Technical specifications

Exhaust emissions category
Operating and travel speed
Working width
Working depth
Operating weight, CE
Displacement
Maximum power
Rated power
Exhaust emissions category
EU not rated/US EPA Tier 2
Operating and travel speed
0 - 88 m/min (0 - 5.3 m/min )
Working width
2,350 mm
Working depth
350 mm
Operating weight, CE
48,500 kg
Displacement
27.2 l
Maximum power
708 kW / 963 HP 1,800 rpm
Rated power
708 kW / 963 HP

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.