Cold recycler  W 380 CRi

W 380 CRi Cold recycler

EU Stage 5/US EPA Tier 4f

3,800 mm

350

mm

High-quality in-place cold recycling

  • Machines from the CR series are used as part of a paving train for cost-effective, in-place cold recycling of road pavements in a single pass by adding cement, water and/or bitumen emulsion, or foamed bitumen at a mixing performance of up to 800 t/h
  • The high-performance W 380 CR i with rear loading and working width of 3,800 mm is used for renovating complete, extra-wide road pavements with extremely high daily output rates
  • Lateral pre-milling gives the cold recyclers the flexibility needed to renovate road pavements in a single pass, even at widths exceeding the machine’s working width.
  • If required, cold recyclers can also be used as high-performance milling machines or for the granulation of road pavement structures.
Show less
Highlights
Simple operating concept
Perfection in visibility, comfort and ergonomic design
Tremendous performance
High-precision, reliable injection systems
Effective cutting and mixing technology
W 240 CR / W 240 CRi with paving screed
W 240 CR / W 240 CRi / W 380 CR / W 380 CRi with rear-loading feature

Cold recycling with CR model series

The cold recycler’s rugged milling and mixing rotor granulates the damaged asphalt pavement. The granulated material is homogeneously mixed with a binding agent and water sprayed into the mixing chamber to produce the new mix on the spot.

If the CR is equipped with a built-in paving screed, the mix is conveyed towards the center as a result of the helical design of the milling and mixing rotor and subsequently transported to the paving unit via the primary conveyor. The spreading auger distributes it evenly in front of the variable paving screed, which ensures that the mix is paved true to line and level.

In cold recycling with built-in rear loading, the mix is conveyed to the asphalt paver’s material hopper via the primary and discharge conveyors. The paver then paves the surface true to line and level.

Learn more

Mixing procedures

Cold recycling can either be carried out in-plant by transporting the material recovered from an existing road to a central warehouse and passing it through a mixing plant, or in-place/in-situ using a cold recycler.

In the in-place/in-situ mixing process, a cold recycler granulates the existing pavement and homogeneously mixes in the binding agent and water.

In the in-plant mixing process, RAP and crushed rock are transported to a mixing plant near the construction site.

Learn more

WIRTGEN cutting technology

High quality results are the goal of every construction project. This applies to road rehabilitation using cold milling machines and cold recyclers as well as to soil stabilization and the extraction of minerals with surface miners. In order to remove pavement with precision and efficiency, it is essential that the drum, pick holder, and pick work together perfectly.

WIRTGEN is the market leader in cutting technology and offers customers high-performance cutting systems whose components are designed to be fully compatible. In addition, WIRTGEN continuously makes advancements to these cutting technology components, incorporating its practical experience and feedback from customers into the process.

Learn more

WIRTGEN leveling technology

WIRTGEN’s leveling technology adjusts height, depth, and pitch for extremely accurate results. In the process, the system permanently compares the actual values to predefined target values and adjusts the deviations proportionally. This state-of-the-art machine technology consistently guarantees outstanding leveling results and significantly reduces the machine operator’s workload.

WIRTGEN offers customers reliable hardware and software developed in-house. In this context, a variety of systems are used depending on the construction project and local conditions at the job site.

Learn more

Control technology

All WIRTGEN machines feature a built-in, high-quality machine control system. The fact that the majority of its software is developed in-house plays a key role in this regard – WIRTGEN has placed a special focus on ongoing development, thus significantly increasing the operational reliability of its machines. Many years of experience in software and hardware development also makes it possible to achieve more flexible and sophisticated machine functionality in terms of the range of applications and individual customer requirements.

Learn more

Technical specifications

Exhaust emissions category
Operating and travel speed
Working width
Working depth
Operating weight, CE
Displacement
Maximum power
Exhaust emissions category
EU Stage 5/US EPA Tier 4f
Operating and travel speed
0 - 88 m/min (0 - 5.3 m/min )
Working width
3,800 mm
Working depth
350 mm
Operating weight, CE
53,000 kg
Displacement
27.2 l
Maximum power
775 kW / 1,054 HP 1,800 min-1

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.