Transportable continuous asphalt mixing plant iNOVA 1500 C

iNOVA 1500 C Transportable continuous asphalt mixing plant

1

75 to 150 t/h

External, double-axle mixing drum with arms and tubes

State-of-the-art unit with a production capacity of 150 t/h that only needs one transport vehicle

State-of-the-art technology for the production of asphalt mixes at a rate of 150 t/h that needs only one transport vehicle. The unit has four feed silos with individual weighing, Open Fire burners and an innovative smart heat exchanger system that ensures maximum thermal output and low fuel consumption. The mixing is done externally in a mixing drum with a dry mixing zone, which ensures maximum homogeneity of the final product. It also comes with automatic checking of the mixing time. Depending on configuration, it is possible to use reclaimed asphalt paving. Control centre with 100% automatic operation (optional), diagnostics system and remote monitoring, equipped with state-of-the-art technology for production control.

  • Production at up to 150 t/h
  • Only needs one transport vehicle
  • Efficient fuel consumption
  • High performance for special mixes
  • Easy to operate
Show more

Technical specifications

Mixing performance
Mixing performance
75 to 150 t/h
Axles/tyres, 1st transport vehicle
Transport vehicle
Size - transport vehicles 1 (L x W x H)
Suspension/brakes - transport vehicles 1
Axles/tyres, 1st transport vehicle
3/12 (+ 1 spare)
Transport vehicle
1
Size - transport vehicles 1 (L x W x H)
21.3 x 3.2 x 4.6 m
Suspension/brakes - transport vehicles 1
Triple tandem/ABS
Mineral dosing
Hopper content
Number of feed hoppers
Speed monitor
Vibrator
Mineral dosing
Individual dynamic weighing using central, high-precision pressure load cells with an individual capacity of 200 kg
Hopper content
2 with 10 m³ + 2 with 5 m³
Number of feed hoppers
4
Speed monitor
Inductive sensor to check the running speed (intake)
Vibrator
3 Standard vibrators in silo 1. Optional vibrator in silo 2
Burner
Dryer drum
Burner
Open Fire
Dryer drum
Countercurrent flow exclusively for drying and heating mineral aggregates
Number of filter cartridges
Filter efficiency
Filter technology
Filter surfaces
Maximum filter/production surface ratio
Number of filter cartridges
132
Filter efficiency
Greater than 99.99%
Filter technology
Bellows hoses, Quick-change system with EasySpin tool
Filter surfaces
777 m²
Maximum filter/production surface ratio
5.2 m²/(t/h)
Bitumen Injection
Cleaning
Mixing zones
Mixing time
Mixer
Wearing parts
Bitumen Injection
With irrigation nozzles
Cleaning
With lower deck
Mixing zones
Dry mix and mix with asphalt cement
Mixing time
Configurable
Mixer
External, double-axle mixing drum with arms and tubes
Wearing parts
Highly abrasion resistant material
Loading silo
Mix transfer
Type
Wearing parts
Loading silo
1 m³
Mix transfer
Trough chain conveyor system
Type
Sensor for maximum filling level, anti-saturation disc; anti-segregation plate, inspection flap
Wearing parts
Highly abrasion resistant material
Climate control
Control
Control cab
Climate control
Air conditioning
Control
Automatic (monitored) or emergency mode (by operator + buttons for manual operation)
Control cab
Metal version with side door, includes control panel, monitoring, buttons for actuators in manual and SPS mode
Filter
Control cab
Dryer drum/burner
Feed unit
Mixer
Electrical power supply
Filter
Emergency stop button
Control cab
Emergency stop button + internal acoustic alarm, Operating interface at very low voltage (24 V)
Dryer drum/burner
Emergency stop button
Feed unit
Protective devices for moving parts, Emergency stop button
Mixer
Emergency stop button
Electrical power supply
SPS safety monitoring, Control circuits with two meters in series
Filter
Dryer drum
Burner/dryer drum
Filter
Cold air flap, Emergency valve
Dryer drum
Countercurrent flow, variable frequency drive
Burner/dryer drum
Flame sensor - UV photocell, Monitoring of dryer intake
Additional vibrator
Bitumen flow meter
Compressor
Fibre feed silo
Added filler silo
Own filler silo
Fuel consumption
Recycling
Remote maintenance
Four-fuel burner
Video camera
Additional vibrator
Set of three vibrators in silo number 2
Bitumen flow meter
Open and closed circuit operation
Compressor
Compressor position can be changed, if required
Fibre feed silo
Silo with 2 m³
Added filler silo
Silo with 2 m³
Own filler silo
Silo with 4 m³
Fuel consumption
Open circuit operation
Recycling
25% reclaimed asphalt paving in the mixer
Remote maintenance
Remote monitoring of production operation
Four-fuel burner
Light oil, heavy oil, LPG and natural gas
Video camera
4 Cameras
Please contact your local dealer about Ciber plants availability and requirements for your country

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.