iNOVA 1500 Continuous mobile asphalt plant
The most advanced technology with production capacity of 150 t / h in only 1 mobility
The most advanced technology for the production of asphalt mixtures that combines the production capacity of up to 150 t/h in only 1 mobility. The plant has four dosing bins with individual weighing, CIBER Total Air burner and the innovative intelligent heat exchange system that ensures maximum thermal performance and low fuel consumption. The mixture is external through a Pug Mill, guaranteeing maximum homogeneity to the final product, besides the automatic control of the mixing time. Possibility of using RAP, depending on the configuration. Control center with 100% automatic operation, diagnostic system and remote monitoring, providing the highest technology in production control.
Show lessTechnical specifications
- Mixing performance
-
- Mixing performance
- 75 to 150 t/h
- Axles/tyres, 1st transport vehicle
- Transport vehicle
- Size - transport vehicles 1 (L x W x H)
- Suspension/brakes - transport vehicles 1
-
- Axles/tyres, 1st transport vehicle
- 3 / 12 (+ 1 spare)
- Transport vehicle
- 1
- Size - transport vehicles 1 (L x W x H)
- 21.3 x 3.2 x 4.6 m
- Suspension/brakes - transport vehicles 1
- Triple tandem / ABS
- Mineral dosing
- Hopper content
- Speed monitor
- Vibrator
-
- Mineral dosing
- Individual dynamic weighing by centralized high precision compression load cells, with an individual capacity of 200kg
- Hopper content
- 2 of 10m³ + 2 of 5 m³
- Speed monitor
- Inductive sensor for speed check (pick up)
- Vibrator
- 3 standard vibrators in bin 1. Optional vibrators in bin 2
- Burner
- Dryer drum
-
- Burner
- CIBER Total Air®
- Dryer drum
- Counterflow dedicated exclusively to the drying and heating of aggregate
- Number of filter cartridges
- Filter efficiency
- Filter technology
- Filter surfaces
- Maximum filter/production surface ratio
-
- Number of filter cartridges
- 132
- Filter efficiency
- Greater than 99.99%
- Filter technology
- Pleated Bags, Quick-change system with EasySpin tool
- Filter surfaces
- 777 m²
- Maximum filter/production surface ratio
- 5.2 m²/(t/h)
- Bitumen Injection
- Cleaning
- Mixing zones
- Mixing time
- Mixer
- Wearing parts
-
- Bitumen Injection
- With sprinkling nozzles
- Cleaning
- With lower deck
- Mixing zones
- Dry mixing and mixing with asphalt cement
- Mixing time
- Configurable
- Mixer
- External double-axled pug mill with arms and straws
- Wearing parts
- High abrasion resistance material
- Loading silo
- Mix transfer
- Type
- Wearing parts
-
- Loading silo
- 1 m³
- Mix transfer
- Redler type drag lift
- Type
- Maximum level sensor, anti-saturation window, anti-segregation plate, inspection flap
- Wearing parts
- High abrasion resistance material
- Climate control
- Control
- Control cab
-
- Climate control
- Air conditioning
- Control
- Automatic (supervisory) or emergency mode (by supervisor + manual operation buttons)
- Control cab
- Metallic with side door, containing control panel, supervisory, buttons for actuation in manual and PLC
- Filter
- Control cab
- Dryer drum/burner
- Feed unit
- Mixer
- Electrical power supply
-
- Filter
- Emergency button
- Control cab
- Emergency button + internal audible alarm, Operating interface in extra low voltage (24V)
- Dryer drum/burner
- Emergency button
- Feed unit
- Fixed protections for mobile parts, Emergency button
- Mixer
- Emergency button
- Electrical power supply
- Security PLC Monitoring, Command circuits with 2 counters connected in series
- Filter
- Dryer drum
- Burner/dryer drum
-
- Filter
- Cold Air Damper, Emergency valve
- Dryer drum
- Counter Flow with variable frequence drive
- Burner/dryer drum
- Flame sensor - UV photocell, Pick up dryer monitoring
- Additional vibrator
- Bitumen flow meter
- Compressor
- Fibre feed silo
- Added filler silo
- Own filler silo
- Fuel consumption
- Recycling
- Remote maintenance
- Four-fuel burner
- Video camera
-
- Additional vibrator
- Kit of 3 vibrators in bin number 2
- Bitumen flow meter
- Open and closed-circuit operation
- Compressor
- Compressor position displacement as required
- Fibre feed silo
- Bin of 2 m³
- Added filler silo
- Bin of 2 m³
- Own filler silo
- Bin of 4 m³
- Fuel consumption
- Open circuit operation
- Recycling
- 25% RAP in the mixer
- Remote maintenance
- Remote monitoring of production during production
- Four-fuel burner
- Light oils, heavy oils, LPG and NG
- Video camera
- 4 cameras
All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.