Laboratory compactor WLV 1

WLV 1 Laboratory compactor

23

J

Preliminary testing to determine the mix quality

  • Test specimens can be easily produced using the laboratory compactor WLV 1.
  • The compaction process is monitored and documented by means of a wire-rope sensor and a display.
  • The sophisticated equipment is ideally attuned to the needs of the cold recycling process and fulfils the high quality standards applicable to testing laboratories.
Show less
Highlights
Efficient manufacture of test specimens

Cold recycling with foamed bitumen

Cold recycling with foamed bitumen has become an established technology worldwide and is now increasingly moving into the focus of road authorities and construction companies for use in the rehabilitation and new construction of road pavements. Cold recycling with foamed bitumen produces flexible and highly durable base layers. Being a part of the pavement structure, these are the perfect foundation for the final asphalt overlay to be built at reduced layer thickness. Foamed bitumen is produced from approx. 175 °C hot road-grade bitumen using state-of-theart technology. Microprocessor-controlled injection systems installed in the WIRTGEN recyclers produce the foamed bitumen and inject it into the mineral aggregate in precisely metered quantities.

Learn more

Mixing procedures

Cold recycling can be achieved either in-plant by hauling material recovered from an existing road to a central depot where it is fed through a mixing unit, or in-place using a recycling machine.

When mixing in-place / in-situ, a cold recycler granulates the existing pavement while mixing in binders and water homogeneously at the same time.

When mixing in-plant, reclaimed asphalt pavement and crushed stone are transported to a mixing plant located in the vicinity of the construction site.

Learn more

Control technology

WIRTGEN machines are fitted with a machine control system of the highest quality, in which the large proportion of software developed in-house plays the decisive role. WIRTGEN puts a special focus on continuous improvement, which has the added effect of significantly increasing the operational reliability of the machines. In addition, many years of experience in software and hardware development allow for higher and more flexible machine functionality in terms of applications and meeting specific customer requirements.

Learn more

Technical specifications

Dimensions (L x W x H)
Own weight
Electrical system
Cylindrical mould, large (Ø x H)
Cylindrical mould, small (Ø x H)
Impact energy, max.
Dimensions (L x W x H)
720 x 600 x 1,950 mm
Own weight
170 kg
Electrical system
1,8 kW verschiedene Verbrauchernetze möglich
Cylindrical mould, large (Ø x H)
152 x 320 mm
Cylindrical mould, small (Ø x H)
152 x 150 mm
Impact energy, max.
23 J

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.