Mobile jaw crusher MC 100 EVO

MC 100 EVO Mobile jaw crusher

D-DRIVE (Diesel-direct)

855 mm x 530 mm x 320 mm

220

t/h

Properties

The smallest mobile jaw crusher of the EVO line impresses with its compactness and reliability. Can be used for the most varied of applications, it offers wide-ranging possibilities for both demolition companies and contract crushing companies. Thanks to the D-DRIVE diesel-direct drive, the MC 100 EVO is economical in consumption.

  • Continuous Feed System (CFS) for optimum crusher loading
  • Innovative crusher unblocking system for extremely short downtimes
  • Efficient and powerful D-DRIVE diesel direct drive
  • Simple control with menu-guided touch panel
Show less
Highlights

Rapid deployment. Prepared for every task.

Feeding unit
CFS
Crusher unit
Control system
Drive
Control system
Magnetic separator and crusher discharge conveyor
Transport
Safety and ergonomics
Prescreening

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values

The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time.

An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.

All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

Find out more

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Find out more

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more

Technical specifications

Max. feed size
Feeding height
Feed height with extension
Feed capacity up to approx.
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Max. feed size
855 mm x 530 mm x 320 mm
Feeding height
3,200 mm
Feed height with extension
3,720 mm
Feed capacity up to approx.
220 t/h
Hopper width
1,900 mm
Hopper width with extension
3,100 mm
Hopper length
3,000 mm
Hopper length with extension
2,800 mm
Hopper volume
3.2 m³
Hopper volume with extension
7.1 m³
Width x length
Width x length
870 mm x 3,940 mm
Discharge height
Discharge height, extended
Width
Length
Length, extended
Discharge height
2,110 mm
Discharge height, extended
3,000 mm
Width
500 mm
Length
2,700 mm
Length, extended
5,000 mm
Crusher drive type
Crusher inlet (W x D)
Crusher weight (approx.)
Crushing power
Single toggle jaw crusher model
Gap setting
Adjustment range of gap width
Crusher drive type
Direct
Crusher inlet (W x D)
950 mm x 550 mm
Crusher weight (approx.)
12,000 kg
Crushing power
160 kW
Single toggle jaw crusher model
STR95-055
Gap setting
Fully hydraulic
Adjustment range of gap width
20 mm - 130 mm
Crushing capacity CSS = 60 mm up to approx.
Crushing capacity CSS = 85 mm up to approx.
Crushing capacity CSS = 60 mm up to approx.
105 t/h
Crushing capacity CSS = 85 mm up to approx.
150 t/h
Discharge height approx.
Discharge height, extended approx.
Width
Length
Length, extended
Discharge height approx.
3,050 mm
Discharge height, extended approx.
3,660 mm
Width
1,000 mm
Length
8,600 mm
Length, extended
10,100 mm
Drive concept
Generator
Power pack manufacturer
Power supply unit output
Rated speed
Drive concept
D-DRIVE (Diesel-direct)
Generator
85 kVA
Power pack manufacturer
Deutz
Power supply unit output
165 kW
Rated speed
1,500 U/min
Transport height approx. (default value)
Transport length approx.
Transport width approx.
Transport weight of basic plant approx.
Transport weight max. configuration approx.
Transport height approx. (default value)
3,200 mm
Transport length approx.
12,965 mm
Transport width approx.
3,000 mm
Transport weight of basic plant approx.
31,000 kg
Transport weight max. configuration approx.
38,500 kg

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.