World premiere: The new Wirtgen slipform paver SP 33 can pave concrete slabs up to a width of 2.2 m (7 ft) in Offset mode and up to a width of 3.0 m (10 ft) transversely to the direction of travel.

Hamm offers a range of solutions that assist the operator during the compaction of reduced-temperature asphalt.

At the shared Booth 59 in Center North, the focus will be not only on cutting edge machine technologies and digital solutions, but also on personal dialogue with visitors to the show.

The new compactors are able to crush and compact mixed soils, stones such as basalt and granite, and other construction materials with comparable pressure resistance in a single work step.

The energy-saving potentials are one of the most important drivers behind the current, strongly growing importance of reduced-temperature asphalt as a road construction material.

The appearance of the Wirtgen Group at the show from 26 to 29 November 2024 emphasises environmentally compatible technologies, solutions and applications which also make decisive contributions to a smarter, safer and more sustainable road construction process chain, as well as efficient mining, quarrying and processing of resources in Asia.

The appearance at the show in Bologna from 9 to 12 October 2024 sets a major focus on pioneering technologies, solutions and applications. Visit us at Booth A49 in Hall 19.

The material discharge and associated material stockpiles can now be better monitored and organised thanks to the new “Stockpile monitoring” function.

The focal points of the show are the SUPER 1800-5(i) tracked paver and the MSS 502(i) EVO mobile screening plant

IF Design Award for small Hamm compactors

Wirtgen Surface Miners and Cross Application Miners are deployed around the world in open-cast mining operations and on infrastructure projects. Cutting drums are the core element of the machines. At MINExpo 2024, from September 24 to 26, 2024 in the Las Vegas Convention Center, the highlights from the Wirtgen Group will include insights into its cutting technology solutions. The focal point on Booth 6815 at the show is a new cutting drum that also enables the cost-efficient extraction of resources with uniaxial compressive strengths of over 100 MPa UCS (14,500 psi).

The machines impressed the jury of experts with a thoughtfully designed platform concept, quiet and eco-friendly operation and innovative cab design.

The Wirtgen Group draws positive conclusions after the end of the Intermat show in Paris. Numerous professional visitors to the 700 square metre stand showed particular interest in our products and technologies and enjoyed the opportunity to discuss the details of them with our experts at the show and learn more about low-emission technologies and applications from Wirtgen, Vögele, Hamm, Kleemann and Benninghoven.

Digitalisation and sustainability were the focal points of the Wirtgen Group Technology Days 2024 at the Kleemann headquarters site in Göppingen from April 18-19.

The new SUPER 1800-5(i) takes road construction to the next level.

With the VA compactors, Hamm is now offering a range of models that enable automatic and infinitely variable regulation of the compaction force.

With the new MOBISCREEN MSS 502(i) EVO, Kleemann extends its portfolio of mobile screening machines below the established MOBISCREEN MSS 802(i) EVO.

Visit the Wirtgen Group booth Q1, get more insights to our digital solutions and experience our premieres for the UK market. One premiere is the new generation of burners from Benninghoven, that enables the use of up to four different fuels in three aggregate states at the same time.

Crushing tools on the Kleemann crushing plants can now also be conveniently managed in SPECTIVE CONNECT using the new “Tool Management” feature.

Successful commissioning of the Benninghoven burner at the customer site

The impact crusher MOBIREX MR 130(i) PRO from Kleemann wins the German Design Award 2024.

The new compactors are able to crush and compact mixed soils, stones such as basalt and granite, and other construction materials with comparable pressure resistance in a single step.

The Compact Milling Machine W 150 Fi Leads the Field of Sustainable Solutions at This Year’s Show in Nashville

The appearance at the show in Paris from 24 to 27 April 2024 sets a major focus on pioneering technologies, solutions and applications.

Hamm is expanding the HD series with more models that can compact with either vibration or oscillation.

The highlight at the World of Concrete show from 23-25 January, 2024, is a complete concrete paving train from Wirtgen – comprising a placer/spreader WPS 102i, a slipform paver SP 124i and a texture curing machine TCM 180i. The offset paver models SP 15i and SP 25i impressively round off the selection of Wirtgen Group solutions on display at the booth shared with John Deere (C5327) at the show.

The newest model of the Wirtgen F-Series large milling machines is now available

The Wirtgen Rock Crusher enables the crushing, processing, and homogenisation of hard core, concrete fragments, cobblestones and stony ground.

In November 2023, Hamm updates its product range in the compact roller segment by 10 models for markets in Southeast Asia, Middle East and Africa.

The latest model of the Wirtgen F-Series rounds off the top end of the compact milling machine class with a milling width of 1.80 metres.

With the mobile impact crusher MOBIREX MR 100(i) NEO / NEOe, Kleemann presents the first family member of the new NEO line.

The new models of the Streumaster MC and TC series set benchmark standards when it comes to filling, material conveying, spreading accuracy and operator-friendliness

Hamm has more than 40 compact machines in its range that are very well suited to rental companies as they are easy to operate and highly cost-effective.

Following the premiere at Bauma 2022, Vögele has now started supplying the MINI 500 and MINI 502.

Kleemann presents different drive concepts for environmentally friendly operation.

The group’s presence at the show focuses on issues including sustainability, digitalisation, automation and electrification.

The new tandem rollers from the HD+ series feature the Easy Drive operating concept and various digital interfaces.

"Smart Job Configurator" configuration tool from Kleemann for quick, optimal machine settings

Hamm is launching four new articulated tandem rollers for the Chinese market.

From city-centre projects to motorway construction: Vögele’s SUPER 1400 tracked paver and SUPER 1403 wheeled paver are two machines with compact dimensions and a versatile range of applications.

The SUPER 1880 L – the multifunctional paver for diverse paving tasks.

Six new HC Series soil compactors have been developed exclusively for Middle East, South East Asian and African countries.

Kleemann presents sustainable solutions for quarrying and recycling at Steinexpo 2023.

The Wirtgen Group and John Deere will be making a joint appearance at Paving Expo in São Paulo, Brazil, from 24 to 26 May 2023. Under the motto ‘The Future in Roadbuilding – Smart. Safe. Sustainable’, visitors to booth 38 at the show will have an opportunity to gain insights into the company group’s innovative and sustainable solutions.

The German Design Award and US Good Design Award for mobile screen for coarse elements MOBISCREEN MSS 802(i) EVO

The two latest compactor series from HAMM were awarded the Good Design Award 2022. The renowned design award has been presented for 75 years and is one of the world's most important awards for ground-breaking design.

With the HP 100i pneumatic-tire roller, HAMM is presenting a new machine that is ideally suited to chipseal. To suit the application, the HP 100i is offered with 13,227 lbs (6 t), 17,637 lbs (8 t) or 22,046 lbs (10 t) operating weights.

The clever line coupling allows Kleemann plants to be easily coupled with one another. The system has now been extended by a wireless version of the safety coupling.

In Verona, the Wirtgen Group will be presenting a cross-section of its extensive product portfolio with 11 exhibits from Wirtgen Vögele, Hamm, Kleemann, and Benninghoven.

With five mobile crushing and screening plants and the operating concept SPECTIVE, Kleemann is presenting a wide-ranging selection from its extensive product portfolio at the CONEXPO.

John Deere will have its largest presence ever at CONEXPO-CON/AGG 2023 this March in Las Vegas. Totaling 80,000 square feet (7 432,24 m²) of booth space, John Deere and Wirtgen Group are combining forces for the first time.

HAMM is presenting new compactors, tandem rollers, pivot-steered tandem rollers, electrified tandem rollers, pneumatic-tire rollers and trench rollers at Conexpo/CON-AGG 2023. Also new in the range: Digital solutions for compaction documentation and analysis.

The mobile stackers MOBIBELT are used for efficient logistics processes on work sites. They flexibly extend the action radius of crushing and screening plants and thus make large stockpiles and improved work site logistics possible.

Wirtgen will be presenting a cross-section of its premium cold milling, recycling, soil stabilising and concrete paving products on the joint booth shared by Wirtgen Group and John Deere.

At CONEXPO 2023, VÖGELE will be presenting an attractive cross-section of its current product range: From the small paver, the SUPER 700i, the SUPER 1300-3i compact paver and the SUPER 1703-3i 8 ft paver through to the SUPER 2000-3i 10 ft paver, all the machines are designed to deliver productivity, efficiency and precision.

The mobile cone crusher MOBICONE MCO 90i EVO2 and the mobile impact crusher MOBIREX MR 110i EVO2 can now be fitted with a double-deck post screening unit as an option.

HAMM presents a new generation of pivot-steered tandem rollers: The HX series. It is impressive thanks to intuitive operation with Easy Drive, high performance data, many comfort features and sustainable operation.

The new Wirtgen Generation Z² cutting tools for cold recyclers and soil stabilisers deliver convincing performance in all materials thanks to high impact resistance, high shank breakage resistance and best-possible pick holder protection.

With the HC series, HAMM is launching a new generation of compactors on the market. With operating weights of 11–25 t and a wide range of equipment variants, they can comply with an extremely wide range of requirements.

The new Wirtgen compact milling machines can now be fitted with a comfort cabin. This makes them the world’s first cold milling machines in this machine class to be offered with a cabin.

HAMM presents new small compactors: The HC CompactLine series (EPA Tier 4/EU Stage V engines) replaces the predecessor H CompactLine series with immediate effect.

Presentation of the new automation technology for cold recyclers and soil stabilisers at Bauma 2022

Road construction companies are equipped for the future with VÖGELE’s latest-generation SUPER 1900-5(i) and SUPER 2100-5(i) Road Pavers and AB 500 and AB 600 Extending Screeds. Highway Class pavers are perfectly at home whether on highways or handling other demanding large-scale projects.

With eight electric rollers in the compact class, HAMM's launch represents a milestone for the compaction industry. The HD 10e and HD 12e models produce zero emissions while performing at the high compaction power associated with the HAMM brand.

‘The Future in Roadbuilding – Smart. Safe. Sustainable.’ This was the motto of the joint appearance by the Wirtgen Group and John Deere at Bauma 2022. With 97 exhibits – including 37 world premieres – and dedicated exhibition spaces covering digital system concepts and sustainability, the Group showcased trailblazing road construction solutions.

HAMM launches new compactors specifically for Southeast Asia, Africa, the Middle East and Latin America in the shape of the HC 119 and HC 129 models.

With its smart compaction concept, HAMM combines a range of cutting-edge solutions for measuring, documenting and analysing compaction processes. Alongside its Smart Doc app, HAMM presents a second compaction assistant in the form of Smart Compact.

At Bauma, and for the first time in Europe, Ciber is presenting the iNOVA 2000, an asphalt mixing plant for the global market.

The intuitive operating concept SPECTIVE includes various components that are ideally tuned to one another and accompany the machine operator during the entire working day. The digital extension SPECTIVE CONNECT is now also available for other Kleemann crushing plants.

With the HX series, HAMM is introducing nine new pivot-steered tandem rollers to the market at bauma 2022. This includes the Smart Compact digital compaction assistant.

At bauma 2022, HAMM is presenting eight electrified tandem rollers, hybrid solutions and additional technologies for low-emission compaction.

Working more efficiently with sustainable and economical technologies is the challenge of today and tomorrow. Solutions from Benninghoven lower emissions and secure the future of asphalt mixing plant sites.

New mobile impact crusher MOBIREX MR 130(i) PRO with all-electric drive concept for natural stone and recycling.

The 260 SX(i) is the first model of a new machine category at Wirtgen

In Munich, the Wirtgen Group is presenting sustainable – and therefore pioneering – solutions for the road construction industry and is once more demonstrating its outstanding powers of innovation.

Patented REVOC system increases sustainability in the asphalt industry and secures the future of plant sites. The REVOC system has been nominated for the 2022 bauma Innovation Award in the “Climate Protection” category ...

The mobile cone crusher MOBICONE MCO 90(i) EVO2 and the mobile impact crusher MOBIREX MR 110(i) EVO2 can now be fitted with a double-deck post screening unit as an option.

At this year’s Bauma, the Wirtgen Group is presenting solutions for the entire road construction process chain. The motto for this year’s event is: ‘The Future in Roadbuilding – Smart. Safe. Sustainable.’

World premiere of the 280 SM(i) Surface Miner

In addition to the SP 15(i) and SP 20(i) offset pavers at this year’s Bauma, Wirtgen is also showing a complete paving train for fully reinforced concrete paving.

Cold recycling technologies from Wirtgen are in use around the globe for climate-friendly and cost-effective recycling of construction materials. The new KMA 240(i) mobile cold mixing plant now makes in situ production of high-quality mixes even more efficient.

The road paver manufacturer will be introducing two new machines with pave widths of between 0.75 and 5 m at the Bauma trade fair in Munich: the compact SUPER 1300 tracked paver and the SUPER 1303 wheeled model.

The VÖGELE product portfolio of road pavers enables users to cover practically any application in asphalt paving. The range of screeds is correspondingly broad, covering twelve models in up to five different compaction variants.

Bauma 2022 will be the world premiere for VÖGELE’s first road pavers and screeds of the new Dash 5 generation: the SUPER 1900-5(i) and SUPER 2100-5(i) Highway Class pavers and the latest-generation AB 500 and AB 600 Extending Screeds.

HAMM has received the world-renowned iF Design Award for the new compactors in the HC series. For HAMM, this is their 38th design award in 25 years.

HAMM is attending bauma 2022, where they will present the HC series – a new generation of soil compactors for all markets, with operating weights between 11 and 25 t.

At bauma 2022, HAMM is presenting multiple new series and models, including new compactors, tandem rollers, electrified rollers and digital solutions for earthworks and asphalt construction.

Kleemann presents a world premiere and sustainable solutions for the quarry and recycling

The Benninghoven REVOC system reduces emissions from asphalt production. Environmentally friendly technology also contributes to securing the future of mixing plants sites ...

With the Benninghoven hot-gas generator, owners can produce asphalt from 100 % recycling material while complying with current stringent emissions standards such as the German TA-Luft regulation...

The fuels of the future are carbon neutral. Benninghoven burners enable reliable use of renewable and therefore sustainable energy sources.

The overload systems of the MC 110 EVO2 and MCO 90 EVO2 ensure that the crushing process is as continuous as possible in order to increase operational readiness.

The jaw crusher MOBICAT MC 110(i) EVO2 and the cone crusher MOBICONE MCO 90(i) EVO2, with their efficient crusher direct drive, have a holistic drive concept that forms the basis for high cost-effectiveness.

Besides CO₂ balance, protecting resources and reducing the energy input, road construction authorities are also increasingly focusing on reduced-temperature asphalt.

The Wirtgen Group booth at the show will be focusing on solutions for earthworks, road construction and materials processing.

With a total of 11 exhibits from Wirtgen, Vögele, Hamm, Kleemann and John Deere, the specialist audience at World of Asphalt was shown a cross-section of market-oriented and holistic solutions for the entire road construction process chain. The focus at the show was set on the critical issues of cost-effectiveness and sustainability.

At the World of Asphalt 2022, VÖGELE presents an attractive cross section of its current product program: From the smallest road paver, the SUPER 700i, through the SUPER 1800-3i SprayJet spray paver up to the SUPER 2000-3i 10 ft paver.

The German Design Award and Good Design Award for the new mobile crushing plants of the EVO2 generation prove their innovative strength

VÖGELE is introducing two new machines with pave widths from 0.75 to 5 m: the compact SUPER 1300 tracked paver and the SUPER 1303 wheeled model.

Work site digitalisation for the MR 110/MR 130(i) EVO2 – all relevant data available on the smartphone

The highlight of the show, the W 120 Fi, celebrates its world premiere at the event as a representative of Wirtgen’s new generation of compact milling machines.

The jaw crusher MOBICAT MC 110(i) EVO2 and the cone crusher MOBICONE MCO 90(i) EVO2 were developed with a focus on output, efficiency and flexibility.

WITOS Paving Docu and Jobsite Temp from VÖGELE enabled the contractor to record paver, paving and temperature data by smartphone and monitor them in real time.

The highlight at World of Concrete 2022 is a complete concrete paving train from Wirtgen – comprising the new WPS 102i placer/spreader, an SP 94i slipform paver, and a TCM 180i texture curing machine.

The powerful screen for coarse elements MOBISCREEN MSS 802(i) EVO was designed to meet changing challenges in different application areas.

Environmentally friendly reconstruction of 375 km of road with the cold recycling method.

Banked turns with a crossfall of up to 32%: Three Vögele pavers have modernised Circuit Zandvoort in preparation for the Dutch Grand Prix.

As a trusted partner of the mining industry, the Wirtgen Group will be presenting its field-proven 220 SM(i) Surface Miner at booth no. 8109 in the Central Hall at Minexpo 2021 in Las Vegas.

Optimum coordination and maximum efficiency were required for paving a width of 11.5 m in the Gubrist tunnel, which was why the contractor put its money on VÖGELE’s WITOS Paving Plus process optimisation solution.

The pneumatic-tyre rollers from the HP series have been on the market across the world for several months and are showing what they can do in practice. This is a completely new generation of pneumatic-tyre rollers, which have been a permanent feature of HAMM's product range since the 1960s.

Happy Birthday! Wirtgen is turning 60 and continues to shape the road construction industry today with its groundbreaking solutions.

The innovative digital operating concept SPECTIVE from Kleemann has optimised the control options of crushing plants in a trendsetting manner. With the SPECTIVE CONNECT extension, Kleemann goes one step further.

India has vast reserves of iron ore and is the second biggest steel producer in the world. The mobile screening plants MOBISCREEN EVO from Kleemann are used during the extraction of the important material.

New functions in WITOS Paving Docu and WITOS Paving Plus increase both the simplicity and the accuracy of job site documentation and process optimization.

In Bad Fredeburg, two HAMM H 25i VC compactors with a special crusher drum were used to simultaneously crush slates and compact.

With its new mobile cone crusher MOBICONE MCO 90(i) EVO2, Kleemann has created the perfect supplement to the jaw crushing plant MOBICAT MC 110(i) EVO2.

At a major company event thrown by Belgian construction company Bodarwé, lots of guests celebrated the commissioning of a Benninghoven TBA 4000 mixing plant.

The contractor used VÖGELE and HAMM machines to build a high-quality, homogeneously compacted carriageway in the Karlsruhe road tunnel.

When high recycling ratios have to be met while complying with low emission rates, there is practically no way around the BENNINGHOVEN hot-gas generator technology. This allows the owner to turn 100 % reclaimed asphalt into new asphaltic mixtures while complying with the new German TA Luft standard.

The KMA 240(i) cold recycling mixing plant produces mix that can be paved immediately and is suitable for the production of various types of bound base layers.

Retrofit solutions from Benninghoven are developed in close collaboration with customers and users.

Formula 1 race tracks are one of the greatest challenges for installation teams and machinery. The Russian building contractor Tekhalyans already used Benninghoven technology during the initial construction of the SOCHI AUTODROM.

With the market launch of the new MOBICAT MC 110(i) EVO2, Kleemann presents a mobile jaw crushing plant of the new generation.

Two SP 154(i) slipform pavers and a TCM 180(i) from Wirtgen rehabilitate a 67 km section of freeway between Prague and Brno.

With Smart Doc, HAMM presents an app with which compaction in earthworks can be transparently documented and the result shared with third parties.

Recycling at the highest level: RAP in counterflow – the solution for the future!

In order to also guarantee effective screening of large volumes, Kleemann offers two new mobile classifying screens with a feed capacity of up to 750 t/h.

After a comprehensive environmental management system was built, HAMM AG was certified according to ISO 14001. This will help the company to continue to improve its environmental performance in the future.

Wirtgen’s KMA 240(i) cold recycling mixing plant is a powerful and environmentally friendly machine capable of fully loading a 20-ton truck with high-quality mix/cold mix every five minutes.

Wirtgen Group machines, together with a John Deere tractor, provide a stable foundation in an industrial park during soil stabilization operations.

With the HD 14i TT, HAMM is presenting a new compact pneumatic-tyre roller that impresses with its high compaction power and optimum visibility, and complies with the exhaust emission standard EU Stage V/EPA Tier 4.

With a basic width of just 1.1 m, the smallest screed from the road paver manufacturer perfectly complements the range of applications of the SUPER 700(i) and SUPER 800(i) Mini Class pavers.

Representatives from contractor Matthäi Bauunternehmen GmbH & Co. KG and construction machinery leasing company MILEX Rent GmbH have taken delivery of the world’s first new PowerFeeders from JOSEPH VÖGELE AG.

The compact 2-track paver from Wirtgen can be used for high-precision paving of concrete surfaces between 3.50 m and 7.50 m wide and up to 450 mm thick.

In order to receive a constant high material volume from a cone crusher with high final product quality, mobile cone crushing plants should be operated in the optimum range. This starts with the selection and composition of the correct tool, which consists of cone and bowl liner.

With Mill Assist, milling operations are carried out particularly cost-effectively. In the process, the Wirtgen Performance Tracker is responsible for the job’s precise documentation.

The MT 3000-3i Standard and MT 3000-3i Offset PowerFeeders from world market leader VÖGELE integrate the latest Dash-3 machine concept and an optimized material handling and maintenance system.

On the A3 near Duisburg, the paving team rehabilitated an area of 60,000 m² in just 55 hours using four WIRTGEN cold milling machines and six VÖGELE pavers.

The W 380 CRi recycler from Wirtgen is capable of recycling the road surface to a full depth of up to 30 cm, which means it is also perfect for full-depth reclamation (FDR).

Depending on the application, Wirtgen’s PCD milling tools offer a significantly longer service life as well as greater machine productivity and availability.

The operation of large machines is often associated with an increased danger potential. This is why personal protection is the highest priority at KLEEMANN.

Project for the SB 300 Fixed-Width Screed from VÖGELE: the new fixed-width screed showed its strengths during construction of a new section of the B75 in Hamburg.

At the Barber Motorsports Park in Birmingham, Alabama, two W 210 Fi from Wirtgen efficiently put their 756 hp to the pavement – a perfect example of cost-effective milling.

Wirtgen’s SP 154i is capable of paving concrete up to 450 mm thick, 16 m wide, and in two layers. It can be used as a bottom layer or top layer concrete paver.

Wirtgen’s 220 SMi 3.8 was once again able to demonstrate its superiority during several performance tests in France. The machine proved to be particularly impressive when it came to production output.

A variety of construction projects typical of the Alpine region can be managed using the SUPER 1803-3i from VÖGELE.

Wirtgen’s 220 SM 3.8 is specialized in soft-rock mining and ensures that deposits are exploited more efficiently.

When milling at the Oroville Dam, the milling contractor benefited from cold milling specialist Wirtgen’s application experience in steep gradient milling.

The tracked recyclers also deliver impressive results during full-depth recycling and high-performance milling.

With the W 220 Fi and W 250 Fi flagship models, Wirtgen, the specialist in cold milling machines has completed its new generation of large milling machines.

With over 30 exhibits, including 10 world and North American premieres, the Wirtgen Group’s booth was a magnet for visitors at Conexpo-Con/Agg 2020.

The 8-foot paver segment is critical to a lot of road construction companies, because these machines cover a very wide range of applications, from small municipal jobs to major highway construction and rehabilitation.

The SUPER 2000-3i and SUPER 2003-3i 10-foot pavers were designed primarily for highways and large-scale projects where performance and productivity are key. Both pavers come with VÖGELE’s user-friendly ErgoPlus 3 operating system.

Intelligent paver management: At Conexpo 2020, JOSEPH VÖGELE AG will be showcasing its new software-based application for road construction. WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the process of sending out job-site reports.

The tracked recyclers also deliver impressive results during full-depth recycling and high-performance milling.

At Conexpo/Agg 2020 in Las Vegas, the MOBICAT MC 120 Zi PRO jaw crusher plant is one of four innovations from Kleemann on show at the trade fair stand of the Wirtgen Group and by John Deere.

A paving team used WITOS Paving Plus for the first time at Jade-Weser Airport.

With the W 220 Fi and W 250 Fi flagship models, Wirtgen, the specialist in cold milling machines has completed its new generation of large milling machines.

11 slipform pavers from Wirtgen are cost-effectively paving concrete surfaces at the new YIA airport in Indonesia with maximum precision.

The world’s best-selling paver, the SUPER 1800-3i, is not the only successful model: the somewhat more compact SUPER 1600-3i is also highly popular.

Wirtgen WPS 62i Placer/Spreader takes the lead.

The Wirtgen Group will be presenting innovative and market-driven solutions for concrete paving at the World of Concrete from February 3 to 7, 2020.

More than 30 exhibits, including 10 world and North American premieres and Wirtgen’s new large milling machines leading the pack – this year, the Wirtgen Group is exhibiting outdoors (Silver Lot 1) at booth S 5419.

In order to turn aggregates and bitumen into asphalt for road construction, a thermal mixing process is needed

“Innovation. Performance. Partners.” The Wirtgen Group’s trade show booth in Las Vegas will feature all three, including more than 30 machines on display.

A total of three W 210 Fi machines demonstrated the added value of their technological innovations during rehabilitation of the A 31 motorway in Italy.

Wirtgen supplies surface miners in a variety of performance classes for the selective mining of raw materials, such as coal, limestone, bauxite, gypsum, salt and phosphate.

The AutoPilot 2.0, which is compatible with Wirtgen’s SP 15i und SP 25i slipform pavers, eliminates the need to measure, mount, and remove stringlines.

High-Precision Concrete Paving with Wirtgen Inset Pavers

Safe and Vibration-Free Limestone Mining in Japan with the 2500 SM Vario Surface Miner

Milling prepares the ground for more mobility

Digital planning, dynamic control, sustainable improvement – the demands on road construction projects are on the rise all over the world.

Soil stabilization, a process widely used throughout the world, is the ideal solution for producing compactable soil with good paving properties from a sub-base with insufficient bearing capacity.

Four Wirtgen slipform pavers are playing an important part in the construction of the apron area for the new Chinese airport.

With a potentially record-breaking pave width of up to 18m, the new SUPER 3000-3(i) can pave the surface course of a four-lane motorway carriageway without joints. As a representative of the Premium Line, the large paver additionally incorporates all the features of the latest "Dash 3" generation. Other highlights include the innovative material transport and the new hydraulic tamper-stroke adjustment.

A total of 120 exhibits, including 18 world premieres and 25 innovations as well as six interactive technology demos: the Wirtgen Group’s booth at Bauma was packed with leading machine and application technologies from Wirtgen, Vögele, Hamm, Kleemann, Benninghoven, and John Deere.

With VÖGELE’s new fixed-width screeds, surface courses as much as 16 to 18 m wide can be paved without joints.

The SUPER 1000(i) and the SUPER 1003(i) represent the global market leader's recently introduced Classic Line. Equipped with the ErgoBasic operating concept, the two compact pavers boast simple handling and excellent value for money.

Wirtgen, the cold milling machine specialist, is boosting milling efficiency in the long-term with its new large milling machine generation

At the heart of this recycling train are tracked cold recyclers such as the new W 380 CRi from Wirtgen.

Wirtgen’s 220 SM 3.8/220 SMi 3.8 surface miner selectively mines raw materials up to a cutting depth of 350 mm and a uniaxial compressive strength of 35 MPa.

In addition to the new F series, all Wirtgen large milling machines built in 2010 or later can be retrofitted with the PERFORMANCE TRACKER.

WITOS Paving Docu allows paving data and delivery notes to be recorded and automates the sending of job site reports. It is a practical, easy-to-use solution for small and medium-sized construction projects.

This telematics solution records operating, position and maintenance data from VÖGELE, WIRTGEN and HAMM machines, increasing fleet availability as a result.

Even just in front of Mont Blanc at an altitude of 1,000 m, the W 220 operated at full capacity, effortlessly milling off the roadway at top speed.

Products from Wirtgen, Vögele, Hamm and Kleemann will underscore how Wirtgen technologies enhance productivity and profitability for road contractors and government agencies.

Wirtgen’s PCD cutters have a tip made of artificial diamond material and produce an exceedingly uniform milled surface.

With a cutting width of 2.2 m and a cutting depth of up to 300 mm, the 220 SM/ 220 SMi can extract raw materials up to a uniaxial compressive strength of 50 MPa.

The highlight of Wirtgen will be the newly developed Wirtgen AutoPilot 2.0. This 3D control system can produce any kind of offset and inset pro with lower costs files.

With working widths up to 18m, the TCM 180i is the ideal team mate for the two SP 1500 pavers. It ensures optimum curing of the new concrete pavement.

A Kentucky concrete slipforming contractor has moved in a big way into curb, gutter and parapet construction by utilizing the advanced technology available to them.

Of the total of 15 machines exhibited, 7 are premieres to the Brazilian market and most of them are also new to the Latin American market.

During rehabilitation work near Tokyo, a W 210 large milling machine removed the surface and binder courses on the Jōban Expressway in individual layers.

Wirtgen surface miners play a key role in increasing production and reducing costs in material extraction for a large cement plant in Ukraine.

In Mobile Bay on the Gulf of Mexico in the US state of Alabama, a Wirtgen slipform paver SP 15i operated fully automatically.

Wirtgen Group showcases premium solutions from a single source

A WIRTGEN WR 250 soil stabilizer laid a load-bearing base for the construction of a new approach road to Interstate 69.

With around 50 exhibits, including 13 premieres for the Chinese market, the Wirtgen Group will present innovative technologies and premium products at bauma China 2018.

Diverse studies and tests show that surface miners offer considerable advantages in terms of both economic efficiency and the final product.

The Wirtgen Group supports fleet and service management for Wirtgen, Vögele, and Hamm equipment with the intelligent WITOS FleetView telematics system.

In autumn 2017, parts of the flight operations areas at Cologne/Bonn Airport were renovated. The mobile cold recycling mixing plant from Wirtgen prepared the material mix.

On job sites, the W 60 Ri small milling machine hits the mark with numerous easy-to-use added and automated functions.

For this mammoth project, CR Almeida is using the efficient W 200 large milling machine, which runs in continuous operation 24 hours a day during the rehabilitation work.

Visitors to the bauma CTT 2018 had the opportunity to obtain first-hand information on the Wirtgen Group's solution competence

The cold milling machines cut at a width of 7 ft., 3 in. The challenge was not the width of the pass-es, but the varying milling depths.

They were the eye-catchers on the Wirtgen Group exhibition area: the latest innovations from Wirtgen, Vögele, Hamm, Kleemann und Benninghoven.

When no less than three global market leaders present their latest technology, it's bound to draw the crowds.

For its WR series, Wirtgen has developed a solution that is more than a match for even the most extreme requirements in both applications: the new DURAFORCE milling and mixing rotor.

Cold milling is one of the first measures taken when a roadway or traffic area needs to be rehabilitated.

From now on, the class leader W 150 CF/W 150 CFi can also be equipped with a 1,800-mm milling drum assembly. Customers therefore profit from a wider range of applications.

The newly-developed Wirtgen AutoPilot 2.0 can produce all manner of offset and inset profiles even more economically and precisely than ever before.

The new Benninghoven plant in Wittlich is being built over a sizable area of 310,000 m² for 130 million Euros.

Plants and machines from Wirtgen, Vögele, Hamm and Benninghoven are playing a vital part in the construction of the "New Istanbul Airport".

At Hillhead 2018 (stand no. Q1), the Wirtgen Group’s British sales and service company Wirtgen Limited will be exhibiting a total of 12 premium products

World of Asphalt 2018: Wirtgen Group showcases solutions for all aspects of asphalt operations

Millimeter accuracy is paramount on a track where every thousandth of a second counts, which is why, when it was time to rehabilitate the pavement, the client took the opportunity to re-profile the track, too.

For this project, the contractor relied above all on the cost-efficiency and precision of the Wirtgen slipform paver in inset application.

e Wirtgen Group premium solutions for the complete road construction process chain will be on display at stand 5A K 180 from April 23-28, 2018.

Wirtgen is continuously developing its core technologies, products and application processes to ensure quality standards are met and that customers can operate economically.

On an area extending over more than 600 m², the Group will be showcasing a representative cross-section of its application-oriented products for the African market on the outdoor grounds (exhibition area T3.115) of bauma Conexpo Africa.

At its stand No. 6343 in the Central Hall at the Las Vegas Convention Center, Wirtgen Group will present innovative solutions for all aspects of concrete paving.

The key role was played by Wirtgen cold recycling technologies. In action: the mobile cold recycling mixing plant KMA 200.

With a display of its innovative solutions for concrete road construction, the Wirtgen Group is presenting three slipform pavers and a texture curing machine from Wirtgen and a mobile Kleemann crusher at this year's World of Concrete trade fair in Las Vegas (indoor booth no. C 6126).

The implementation of new technology into an existing mining operation can deliver a positive change in operation and commercial benefits

With the W 210 XP, the Wirtgen experts have extended their comprehensive product range with a new high-performance machine.

The Wirtgen Group, with its product brands Wirtgen, Vögele, Hamm and Kleemann, will be showcasing leading technologies for the entire road construction process chain at Excon 2017. Wirtgen’s milling machines W 195, W 120 R and slipform paver SP 62 will be celebrating their trade fair debut in India.

The Wirtgen cold recycling process has been proving its credentials for many years – and already meets the demands of tomorrow.

As part of the rehabilitation project on the A 36 highway near Dijon, the Wirtgen W 200i cold milling machine with cabin milled off the asphalt surface with great precision.

For the trenching job in Upper Austria, Hemmelmair Frästechnik GmbH opted to use the compact milling machine W 100 CFi from Wirtgen.

The Wirtgen Group will be showcasing leading technologies for the entire road construction process chain in Neumünster.

The German Brand Institute in Berlin decorated the Wirtgen Group with the German Brand Award 2017 for its Corporate Design.

The Wirtgen Group will be showcasing tailored solutions for recycled material processing and quarry applications when it exhibits products from Kleemann and Benninghoven.

Two type 4200 SM Wirtgen surface miners are bringing light to South Texas and Northern Mexico.

Costello Industries, Inc., a milling service provider based in Newington, CT/USA, relies exclusively on cold milling from Wirtgen.

The Wirtgen Group announced that it has signed a definitive agreement with Deere & Company.

Over 40 products – many of them new to North America – will demonstrate Wirtgen Group product performance, innovation and dedication to customers at stand No. C 31239 at Conexpo-Con/Agg 2017 in Las Vegas.

In San José/USA, in-situ cold recycling with a Wirtgen 3800 CR recycler proves to be the most economical solution.

On Tuesday, 11 April 2017, BENNINGHOVEN celebrated the laying of the cornerstone for the worldwide largest and most modern factory for the manufacturing of asphalt mixing plants in Wittlich Wengerohr.

They all did an excellent job – so excellent, in fact, that the project was completed after just 42 nights.

To make the "Marco Simoncelli" Misano World Circuit faster and safer, Pesaresi Giuseppe SpA decided to take advantage of the cutting-edge technologies of Wirtgen and Trimble.

Wirtgen will be attending the 5th Symposium Mines Guinea event in the capital Conakry, showcasing the company as a reliable mining partner to trade visitors.

The Wirtgen Group sales and service company Wirtgen Augsburg is showcasing tailor-made solutions for the treatment of recycling materials.

Thanks not least to the Wirtgen Group’s reliable and efficient technologies, the crews succeeded in completing their work sections on schedule.

VORO, a milling contractor based in Kassel, Germany, brought the versatility of the W 100 CFi Wirtgen compact milling machine into play when rehabilitating the surface course of a federal highway.

The current rehabilitation work is part of an extensive maintenance program that is designed to further improve the complete infrastructure.

The new Wirtgen SP 94i slipform paver excels in the reconstruction of a runway in Missouri/USA.

The various tasks would normally be standard activities, if it were not for the extreme time pressure and high quality requirements.

Over the last two years the cold milling machine market leader has completely revamped its product range of small and compact milling machines.

BENNINGHOVEN is building a new main plant in Wittlich Wengerohr. The specialist for manufacturing asphalt mixing plants will move into the new production facility in Wittlich in early 2018.

Swayed by the numerous economic and technical advantages, more and more planning engineers are opting for this technology when rehabilitating concrete highways.

Construction machines from Wirtgen kicked off the rehabilitation work on the runway at Alghero-Fertilia Airport on Sardinia.

Mining material deposits and processing mineral raw materials imposes high demands on man and machine.

Ulaanbaatar is the hub for the rising economy and center of expansion for trade and industry.

After some 15 years in service, this longest runway at the airport had to be completely rehabilitated.

Five strong brands – Wirtgen, Vögele, Hamm, Kleemann and now Benninghoven exhibiting together for the first time in the UK.

The Wirtgen Group is still growing and exponentiating its portfolio of products and services for the customer.

They are the machines of choice for renewing expansive asphalt or concrete surfaces: Wirtgen's large milling machines.

No less than eight models are available to customers in the compact class, with standard working widths between 1.0 and 1.5 m and depths up to 330 mm.

Wirtgen GmbH supplied the key technology needed to pave the concrete.

Top quality on every job.

Concentrated power of the WIRTGEN GROUP on the job at Büchel Air Base

They are the machines of choice for renewing expansive asphalt or concrete surfaces: Wirtgen's large milling machines.

In addition to its new generation of small milling machines, industry-leader Wirtgen is showing all of its latest compact milling machines.

Today, Wirtgen is the market leader on a global scale, offering a range of 9 machines and plants for in-situ or in-plant cold recycling applications.

Wirtgen have further enhanced their comprehensive range of cutting technology products.

When it comes to the precision and cost-efficient construction of concrete pavements and monolithic profiles, Wirtgen's slipform pavers are right for the job.

With their SP 90 series, Wirtgen has launched two new mid-range inset pavers which meet all the requirements for successful concrete paving.

Self-propelled curing units, such as the new TCM 180i from WIRTGEN, guarantee the success of professionally cured concrete pavements

r the first time ever, the Group will be presenting itself together with Benninghoven at the world's biggest trade fair for construction machinery.

The spreader module will be making its bauma debut in Munich, installed in the Wirtgen WR 250.

Cutting the red ribbon, Managing Director Pok Sum Loong, YBhg Dato’ Sri Zohari Haji Akob, the Secretary General of the Ministry of Works of Malaysia, and Stefan Wirtgen officially opened the new subsidiary Wirtgen Malaysia.

Jürgen Wirtgen handing over the new Wirtgen South Africa branch to Managing Director Heinrich Schulenburg.

The burner is one of the most important components of any asphalt mixing plant. It is the prerequisite for optimum results for drying mineral and therefore for the quality of the mixture.

Right in time for bauma, the W 120 Ri small milling machine celebrates its world premiere. This rear-loader rounds out Wirtgen's new generation of small milling machines. The complete line now includes no fewer than 16 machines with milling widths from 350 to 1,300 mm.

Wide variety and high quality are the watchwords, for both inset and offset operation.

The W 200 Hi owes its wide variety of uses to an innovative highlight, namely the hydraulically driven milling drum assembly.

he new visual orientation symbolizes the strength of the corporate affiliation, which has developed over the course of many years, and stands, above all, for one thing: The brands' joint focus on the needs of customers.

A kilometer and a half of bridge parapets need to be constructed, just before the end of the construction season? No problem for the Sangamo Construction Company.

North American Coal is committed to setting industry standards in the mining sector in terms of safety, environmental protection and innovation.

Since early this year, machines supplied by the Wirtgen Group have been stabilizing the entire site. These include two Wirtgen tractor-towed soil stabilizers WS 250, a Hamm H 20i compactor and a Streumaster binding agent spreader SW 16 TC.

The cutting drum is fitted with fewer cutters than the standard drum working in windrow mode. This cuts tool consumption.

It was a classical application for super-fine milling and GMS, a specialist in this domain, once again opted to use this established technology from market leader Wirtgen.

Structural repairs have been carried out on a 35-km section – the stretch between the 11 and 46 kilometre marks – which extends from São Paulo in an easterly direction.

In this respect, Wirtgen GmbH offers its customers appropriate solutions for every application, including such unconventional and unique jobs as the M6 project.

Premiere in Paris: The Wirtgen Group makes its first appearance with Benninghoven at Intermat, presenting the newly expanded team in its entirety.

A small machine with a big impact: That sums up the new W 35 Ri.

The flexibility and excellent performance of the W 100 CFi are assured by a number of other clever solutions for milling and loading.

By supplying the 3800 CR as a rear loader, Wirtgen offers an efficient and flexible solution for in-situ cold recycling. However as a front loader the 3800 CR also excels as a high-performance cold milling machine.

The first WR 250 delivered to Italy was put to work on the A4 Turin-Trieste highway, one of the busiest roads in Europe, and it turned out to be exceptionally productive.

The 2200 SM harvests an average 895 t/h of salt at diesel consumption rates of only 0.12 l / t respectively.

Galvão Engenharia chose a Wirtgen slipform paver SP 850 to meet the project requirements.

When developing the Chisholm Trail Parkway in the US State of Texas, they are used for routing work and reliably bite their way through hard rock.

Recycling in the megacity environmental protection in São Paulo: The Avenida Sapopemba is the busiest road in São Paulo and one of the country’s main traffic routes. It has now been rehabilitated, making economical use of resources. In operation: the KMA 220.