Mobile cone crusher MCO 90i EVO2

MCO 90i EVO2 Mobile cone crusher

D-DRIVE (Diesel-direct)

200 mm

270

t/h

The MOBICONE MCO 90 EVO2 impresses as a powerful team player in hard stone. Whereas top product quality is expected from a cone crusher, the MCO 90 EVO2 combines this with a high production output. The plant is characterized by the best possible economy, simple operation and innovative overload systems.

  • Simple and intuitive SPECTIVE control concept
  • Continuous Feed System (CFS) for optimal crusher feeding
  • Innovative overload systems for protecting the crusher
  • Efficient and powerful D-DRIVE diesel-direct drive
  • Linkage option with other KLEEMANN plants
  • Application as secondary or tertiary crusher
Show less
Highlights

The MCO 90 EVO2 is powerful, efficient and ideal for use in conjunction with the MC 110 EVO2 mobile jaw crusher.

CFS
Feeding unit
Drive
Overload system
Post screening unit
Accessibility and safety
Control system
Crusher unit
Transport

Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values

The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time.

An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.

All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

Find out more

Ring Bounce Detection

A smart overload protection

During ring bounce, a movement is created between the bowl and the main frame of the cone crusher as a result of excessive crushing forces. This is triggered by feed sizes that are too large or small, an excessive fine content or the continuous feeding of uncrushable material.

To protect the crusher, software continuously monitors the hydraulic pressure of the crusher overload system and reacts when necessary with two modes:

Mode 1 – PRECISE MODEfor the production of grit: The machine stops feeding if ring bounce is detected; the operator receives a fault message and can adapt his process. This mode assures that no impermissible oversize grain is produced and the machine is protected against crusher damage

Mode 2 – MIXTURE MODEfor the production of mixtures: In this mode, the machine adjusts the crushing gap - without intervention of the operator - automatically to prevent ring bounce. After a defined period without ring bounce, the gap is closed again to keep the share of oversize grain as low as possible

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Intuitive control concept SPECTIVE - for simple operation

The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground.

SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localization, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

Find out more

SPECTIVE CONNECT

Operator information App, unidirectional communication

All relevant data at a glance
> Dashboard
> Camera live image
> Reporting
> Messages and troubleshooting aids
> Overview of all plants in the train

The operator can remain in the excavator/wheel loader
> No interruption to the work process
> Increase in work safety

Find out more
News & Job reports

Technical specifications

Max. feed size
Feed height
Feed height with extension
Feed capacity up to approx.
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Max. feed size
200 mm
Feed height
2,600 mm
Feed height with extension
3,240 mm
Feed capacity up to approx.
270 t/h
Hopper width
2,780 mm
Hopper width with extension
3,700 mm
Hopper length
3,000 mm
Hopper length with extension
3,500 mm
Hopper volume
6.6 m³
Hopper volume with extension
8.3 m³
Width x length
Width x length
1,000 mm x 6,400 mm
Crusher drive type
Crusher weight (approx.)
Crusher capacity
Crusher system size
Cone crusher type
Crusher drive type
direct
Crusher weight (approx.)
8,900 kg
Crusher capacity
185 kW
Crusher system size
970 mm
Cone crusher type
KX250
Crushing capacity at 0-45 mm approx.
Crushing capacity at 0-56 mm approx.
Crushing capacity at 0-63 mm approx.
Crushing capacity at 0-45 mm approx.
245 t/h
Crushing capacity at 0-56 mm approx.
255 t/h
Crushing capacity at 0-63 mm approx.
270 t/h
Discharge height approx.
Discharge height, extended, approx.
Width
Length
Length, extended
Discharge height approx.
3,300 mm
Discharge height, extended, approx.
3,700 mm
Width
800 mm
Length
9,100 mm
Length, extended
10,400 mm
Drive concept
Rated speed
Generator
Power pack manufacturer
Power supply unit output
Drive concept
D-DRIVE (Diesel-direct)
Rated speed
1,500 rpm
Generator
135 kVA
Power pack manufacturer
Scania
Power supply unit output
287 kW - 287 kW
Discharge height, fine grain discharge conveyor, approx.
Width x length approx.
Type
Return conveyor width
Return conveyor length
Discharge height, fine grain discharge conveyor, approx.
3,440 mm
Width x length approx.
1,350 mm x 4,000 mm
Type
Vibrating single-deck screen
Return conveyor width
500 mm
Return conveyor length
9,000 mm
Transport height approx. (standard value)
Transport length approx.
Transport length with secondary screening unit approx.
Transport width approx.
Transport width with secondary screening unit max.
Transport weight of basic plant approx.
Transport weight max. configuration approx.
Transport weight of screening unit approx.
Transport height approx. (standard value)
3,400 mm
Transport length approx.
16,000 mm
Transport length with secondary screening unit approx.
20,200 mm
Transport width approx.
3,000 mm
Transport width with secondary screening unit max.
3,240 mm
Transport weight of basic plant approx.
33,500 kg
Transport weight max. configuration approx.
49,000 kg
Transport weight of screening unit approx.
8,930 kg
Width x length
Return conveyor width
Return conveyor length
Side discharge conveyor (medium grain) width
Side discharge conveyor (medium grain) length
Side discharge conveyor (medium grain) discharge height
Width x length
1350 mm x 4000 mm
Return conveyor width
500 mm
Return conveyor length
9,000 mm
Side discharge conveyor (medium grain) width
500 mm
Side discharge conveyor (medium grain) length
6,300 mm
Side discharge conveyor (medium grain) discharge height
3,000 mm

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.