Mobile jaw crusher MC 100i EVO

MC 100i EVO Mobile jaw crusher

D-DRIVE (Diesel-direct)

34 in x 21 in x 13 in

243

US t/hr

Properties

The smallest mobile jaw crusher of the EVO line impresses with its compactness and reliability. It can be used for a huge variety of materials, offering wide-ranging possibilities for both demolition companies and contract crushers. Thanks to the diesel direct drive, the MC 100i EVO is economical in consumption.

  • Continuous Feed System (CFS) for optimal crusher feeding
  • Innovative crusher unblocking system for extremely short downtimes
  • Efficient and powerful D-DRIVE diesel direct drive
  • Easy control via menu-guided touch panel
Show less
Highlights

Rapid deployment. Prepared for every task.

Feeding unit
CFS
Crusher unit
Control system
Drive
Control system
Magnetic separator and crusher discharge conveyor
Transport
Safety and ergonomics
Prescreening

Continuous Feed System (CFS)

For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values

The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time.

An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.

All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

Find out more

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Find out more

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Find out more

Technical specifications

Max. feed size
Feed height
Feed height with extension
Hopper width
Hopper width with extension
Hopper length
Hopper length with extension
Hopper volume
Hopper volume with extension
Max. feed size
34 in x 21 in x 13 in
Feed height
10 ft 6 in
Feed height with extension
12 ft 2 in
Hopper width
6 ft 3 in
Hopper width with extension
10 ft 2 in
Hopper length
9 ft 10 in
Hopper length with extension
9 ft 2 in
Hopper volume
4.2 yd³
Hopper volume with extension
9.3 yd³
Width x length
Width x length
35 in x 12 ft 11 in
Discharge height
Discharge height, extended
Width
Length
Length, extended
Discharge height
6 ft 11 in
Discharge height, extended
9 ft 10 in
Width
20 in
Length
8 ft 10 in
Length, extended
16 ft 5 in
Crusher drive type
Crusher inlet width
Crusher weight (approx.)
Crusher capacity
Single toggle jaw crusher type
Crusher gap adjustment
Gap width max.
Gap width min.
Crusher drive type
direct
Crusher inlet width
37 in
Crusher weight (approx.)
26,455 lbs
Crusher capacity
215 hp
Single toggle jaw crusher type
STR95-055
Crusher gap adjustment
Fully hydraulic
Gap width max.
5 in
Gap width min.
1 in
Crushing capacity with CSS = 2.4" up to approx.
Crushing capacity with CSS = 3.3" up to approx.
Crushing capacity with CSS = 2.4" up to approx.
116 US t/hr
Crushing capacity with CSS = 3.3" up to approx.
165 US t/hr
Discharge height approx.
Discharge height, extended, approx.
Width
Crusher discharge conveyor length
Length, extended
Discharge height approx.
10 ft 0 in
Discharge height, extended, approx.
12 ft 0 in
Width
40 in
Crusher discharge conveyor length
28 ft 3 in
Length, extended
33 ft 2 in
Drive concept
Generator
Power pack manufacturer
Power supply unit output
Rated speed
Drive concept
D-DRIVE (Diesel-direct)
Generator
85 kVA
Power pack manufacturer
Deutz
Power supply unit output
208 hp
Rated speed
1,500 rpm
Transport height approx. (standard value)
Transport length approx.
Transport width approx.
Transport weight of basic plant
Transport weight max. configuration approx.
Transport height approx. (standard value)
10 ft 6 in
Transport length approx.
42 ft 6 in
Transport width approx.
9 ft 10 in
Transport weight of basic plant
74,500 lbs
Transport weight max. configuration approx.
83,850 lbs

All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.